The Best TV Antenna Preamplifier of 2023

SIGNAL BOOSTER: PBD TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any non-amplified antenna; antenna required for use with preamplifier.

4G LTE FILTER: 4G LTE Filter built-in for less picture pixilation.

EASY INSTALLATION: Mounting hardware and instructions are included for simple installation

WHAT YOU GET: PBD amplifier with power supply adapter and 3FT RG6 Coaxial Cable.

NOTE: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.

The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any NON-AMPLIFIED antenna; antenna required for use with preamplifier. ONLY WORKS WITH NON-AMPLIFIED ANTENNAS.

20dB TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.

Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation

Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.

Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.

Designed specifically to improve the performance of outdoor antennas in low signal strength areas

Switchable FM trap reduces interference from FM frequencies

REFER TO ALL THE RELEVANT DOCUMENTS BELOW BEFORE USE.

Preamplifier for outdoor antennas extends range in low signal strength areas

RCA's advanced SmartBoost technology amplifies weak signals to deliver the most channels possible

Optimizes performance with separate UHF/VHF amplification

Switchable FM trap to prevent interference from FM signals

Use in all difficult reception areas. VHF gain: 16dB, UHF gain: 22dB, Intermodulation: Avg>60dB

Designed and engineered in the USA

** VERY IMPORTANT**DISCLAIMER: Reception quality and channels received will depend on distance from towers, broadcast power, terrain and other factors. Hence kindly refer the User Manual before use.

SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.

EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.

U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

UHF & VHF can be Adjusted Separately -- You can amplifies the VHF and UHF signals separately to match the signal conditions in your area for maximum performance.

Enhances Your Antenna Signal -- ANTOP HDTV preamplifier SBS-611B can enhances your non-amplified antenna for more channels, clear pictures, further receive range and reduce signal dropout. Bring you a better TV watching experience.

Specially Designed for Outdoor Equipment -- Water resistant shell can be used outdoors to prevent bad weather such as wind, snow and rain. If you install it indoors, the shell can also help you prevent dust and mice.

Professional Signal Shielded -- Double shell protection: A metal shell inside the black shell for professional grade construction and quality, noise figure less than 2dB.

NOTE: This product can replace the amplifier of your antenna or be used for non-amplified antenna, but it is not recommended to use it with the antenna with built-in amplifier function. Even if you use an amplifier to amplify the signal, it does not mean that you will receive more TV channels. It depends on your location and nearby obstacles.

SIGNAL BOOSTER: PBD TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any non-amplified antenna; antenna required for use with preamplifier.

4G LTE FILTER: 4G LTE Filter built-in for less picture pixilation.

EASY INSTALLATION: Mounting hardware and instructions are included for simple installation

WHAT YOU GET: PBD amplifier with power supply adapter and 3FT RG6 Coaxial Cable.

NOTE: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.

Product 1: The future of Free HDTV replaces large unsightly outdoor antennas

Product 1: Antennas will vary on reception in regards to placement of the antenna & distance from the transmitting towers

Product 1: Dual band VHF/UHF driven element with integrated reflector

Product 1: State of the art ultra low noise split band digital amplifier

Product 2: The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier

Product 2: TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.

Product 2: Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation

Product 2: Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.

The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any NON-AMPLIFIED antenna; antenna required for use with preamplifier. ONLY WORKS WITH NON-AMPLIFIED ANTENNAS.

20dB TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.

Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation

Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.

Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.

Designed specifically to improve the performance of outdoor antennas in low signal strength areas

Switchable FM trap reduces interference from FM frequencies

REFER TO ALL THE RELEVANT DOCUMENTS BELOW BEFORE USE.

Preamplifier for outdoor antennas extends range in low signal strength areas

RCA's advanced SmartBoost technology amplifies weak signals to deliver the most channels possible

Optimizes performance with separate UHF/VHF amplification

Switchable FM trap to prevent interference from FM signals

Use in all difficult reception areas. VHF gain: 16dB, UHF gain: 22dB, Intermodulation: Avg>60dB

Designed and engineered in the USA

** VERY IMPORTANT**DISCLAIMER: Reception quality and channels received will depend on distance from towers, broadcast power, terrain and other factors. Hence kindly refer the User Manual before use.

UHF & VHF can be Adjusted Separately -- You can amplifies the VHF and UHF signals separately to match the signal conditions in your area for maximum performance.

Enhances Your Antenna Signal -- ANTOP HDTV preamplifier SBS-611B can enhances your non-amplified antenna for more channels, clear pictures, further receive range and reduce signal dropout. Bring you a better TV watching experience.

Specially Designed for Outdoor Equipment -- Water resistant shell can be used outdoors to prevent bad weather such as wind, snow and rain. If you install it indoors, the shell can also help you prevent dust and mice.

Professional Signal Shielded -- Double shell protection: A metal shell inside the black shell for professional grade construction and quality, noise figure less than 2dB.

NOTE: This product can replace the amplifier of your antenna or be used for non-amplified antenna, but it is not recommended to use it with the antenna with built-in amplifier function. Even if you use an amplifier to amplify the signal, it does not mean that you will receive more TV channels. It depends on your location and nearby obstacles.