The Best TV Antenna Amplifier of 2023

Four Amplified Output Ports (8 dB)

Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)

Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels

Miniature Size for Space-Saving Installations

Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

Connect one TV antenna to 4 rooms while boosting signal in each location for reliable reception

Weatherproof indoor / outdoor housing (power supply component for indoor use only)

7.5dB amplification per port

Includes distribution amplifier, power supply, 3ft coaxial cable for power supply, and instructions

Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.

Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.

6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 1 Year Warranty.

PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.

Kit includes Amplifier, Power Supply, 36 inch custom super-flexible power cable, and two 75-ohm port terminators. Note: The included cable is for power only, not for cable TV signals.

The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any NON-AMPLIFIED antenna; antenna required for use with preamplifier. ONLY WORKS WITH NON-AMPLIFIED ANTENNAS.

20dB TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.

Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation

Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.

Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.

Improves over the air signals by filtering out mobile LTE signal interference (3G and 4G) which can cause intermittent TV signal disruption including weak signals

Pixilation or channel loss

Made in Taiwan

SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor/outdoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

4-WAY SPLITTER – Works with all brands of TVs and passive antennas to distribute one audio/video source to up to four devices with F-type coaxial connectors. This will require coaxial cable (sold separately).

EASY INSTALLATION – Simple to set up and comes with an AC power adapter user manual and installation instructions.

U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation.

High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing.

Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution.

Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels.

Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability. [Note]: This item uses 110V AC power only. It can not be used for 220V setup.

PATENTED SIGNAL FINDER LED – This amplifier features patented, built-in LED Signal Finder Technology to identify the best location and orientation of your outdoor or attic TV antenna to provide optimal reception.

WEATHER-RESISTANT DESIGN – Designed to withstand the elements, this durable amplifier is easy to install, can be placed in the best outdoor location to minimize interference from building materials and walls, and can be mounted on an exterior mast or wall – or used indoors.

4G/5G LTE FILTER – Designed for use with all antenna brands, this outdoor amplifier’s TruAmp Technology includes a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and boosts the signal for enhanced, clear, pure reception of HDTV, VHF and UHF channels.

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels that your antenna is already receiving. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position and obstacles, including hills, buildings and trees.

U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8AM, Central Time to assist with any questions or issues.

HDTV Antenna Amplifier - The Winegard Boost TV signal booster enhances any indoor non- amplified antenna, delivering more range and available channels. Delivers a crystal clear signal, watch more channels than with an antenna alone.

Amplified Clear Circuit Technology - Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation. The Boost preamplifier enhances any non-amplified antenna.

In The Box - Includes Winegard Boost LNA-100 indoor digital TV antenna amplifier, energy saving USB power cable with LED power indicator, 110V adapter and printed documentation.Gain (typical): 20 dB,Power: +5V

Winegard Boost Warranty and Support - The LNA-100 digital antenna booster comes with a 1 year parts and labor limited warranty and complimentary telephone and email support.

Winegard TV Antenna Experts - Leading US designer and manufacturer of quality TV antenna and signal equipment since 1954. Designed and built in the U.S.A.

SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.

EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.

U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.